Pairing The Motorola HS850 To The Jabra A210
Pairing creates a link between the A210 and headset using Bluetooth* wireless technology and allows the A210 to remember the headsets unique ID. After the A210 and headset are paired, the headset automatically connects to the A210 any time the units are turned on.
To pair the HS850 with the Jabra A210
- Put the HS850 in pairing mode.
- With the headsets boom closed, press and hold the Multifunction button until the indicator turns on (approx 4 sec.).
- Release the button, and then open the headset boom. The indicator should remain on.
- Put the A210 in pairing mode
- Press the on/off button to turn on.
- Using the pairing stylus, press the pairing switch. When the blue LED turns solid blue, the A210 is in pairing mode.
- When paired, the units will blink every 3 seconds.
- If pairing is unsuccessful, then repeat steps 1 and 2
NOTE: If the A210 blue light remains on after unsuccessful pairing, press and hold the on/off button while using the pairing stylus to press the pairing switch.
Save this page as a Microsoft Word Document
